Preview — business name to be chosen
Minnesota Window ReplacementCouple-owned in Chanhassen, MN Get my preliminary quoteGet my quote

New windows, priced before anyone visits your house.

We’re a couple-owned installer in Chanhassen, and we install two Marvin lines only: Essential, Ultrex fiberglass inside and out, and Elevate, real wood inside with the same tough Ultrex outside.

Tap a picture for each window, add rough sizes if you have them (they tighten your price) and photos if you like, add your contact details, and see your personalized preliminary quote. We check every measurement in person before anything is ordered.

No account, and no sales visit to see a number. About five minutes on your phone.

Drawing of an example house with six windows tagged W1 to W6; window W5 is marked 40 inches wide by 30 inches high.W1W2W3W4W5W640″ W30″ H
Example: one house, and the window list you’d build for it. Rough sizes give the tightest price; rooms are optional.
WindowTypeSize (W × H)Room
W1Double-hung28″ × 40″Bedroom
W2Casement24″ × 48″Living room
W3Picture72″ × 48″Living room
W4Casement24″ × 48″Living room
W5Slider40″ × 30″Kitchen
W6Awning36″ × 16″Basement

Already have a quote code?

Pick up where you left off, or see your preliminary quote, on any device.

Your code appears at the top of your quote as soon as you add your first window. No account or password needed.

  • Marvin only, no vinyl

    Essential and Elevate only, backed by Marvin’s limited warranty. Why no vinyl?

  • Old windows hauled away

    Haul-away, disposal and any permit fees are in your price.

  • Measured before ordering

    We verify every opening in person. Nothing is ordered before that.

  • Couple-owned in Chanhassen

    Installed by the owners, serving Minneapolis and the southwest Twin Cities.

How it works

The online part takes about five minutes, from your couch with your phone. Nobody visits your house until you’ve seen your personalized price and decided it works for you.

  1. Your home

    Your ZIP code, roughly when the house was built, and whether there’s brick outside. That’s it.

    About 10 seconds

  2. Your windows

    Tap a picture for each window. Add rough sizes for the tightest price, or pick small, typical or big. Your quote saves as you go, so you can step away to measure.

    A few minutes

  3. Your details

    Name and email; phone is optional. Your quote code works on any device. No account, no password.

    About a minute

  4. Your price

    A personalized range with a plain breakdown (product, installation, disposal and permits) and what could move it.

    Instant

  5. Measure visit

    Only once the range works for you. We verify every opening and lock the final price in writing.

    About 30–45 minutes at your home

Get my preliminary quote

Your price comes from your windows

We don’t post one range for every house, because it would mislead more than it helps. Tell us about your windows, add your name and email (phone is optional), and you’ll see a personalized preliminary quote on the next screen.

Your online range is based on your windows’ types and rough sizes and the Marvin line you pick. Windows you haven’t measured are priced on the high side, so measuring can only narrow your range. We confirm exact sizes, grids, glass and installation details at your measure visit, and your final written price reflects them.

Get my preliminary quote

Financing: details to be confirmed before launch. No partner or rate is listed here yet.

Every preliminary quote includes

  • Marvin windows, Essential or ElevateIncluded
  • Installation to Marvin’s instructionsIncluded
  • Old-window haul-away and disposalIncluded
  • Permit fees, where requiredIncluded
  • Minnesota sales taxIncluded
  • Marvin’s limited warrantyIncluded

What Marvin’s warranty covers

What moves the price

Size
Larger openings and picture windows cost more in glass and labor.
Standard or custom size
Both Marvin lines come in standard sizes and custom sizes. An opening that fits a standard size can cost less than a custom one. We check every opening at your measure visit.
Marvin line
Essential costs less because it’s one material throughout: Ultrex inside and out, slim frames, no painting or staining. Elevate costs more for its real wood interior.
Style
Casements cost more than double-hungs and sliders at the final quote.
Grids, color and glass
Divided lites, exterior color and triple-pane add cost.
Install complexity
Brick exteriors, rot repair, full-frame replacement or second-story access.
Age of the home
Pre-1978 homes may need EPA lead-safe (RRP) work, assessed at the measure visit. It isn’t priced into the online preliminary range.

Two Marvin lines, in plain language

You don’t need to know windows to choose. Ask one question: do you want real wood inside your house, or do you want to never think about upkeep? Wood inside: Elevate. No upkeep: Essential. Both are strong, both handle Minnesota winters, and both use the same tough exterior finish.

Marvin Essential

No upkeep. Ultrex fiberglass inside and out.

What it is
Ultrex fiberglass inside and out, with narrow frames and clean lines.
Why it matters
Virtually maintenance-free, with no painting or staining, and the finish resists fading and scratches, even in dark colors.
Best for
Most homes. A strong, good-looking window you can install and forget about.
Choosing
The easiest to choose: straightforward sizes and options, fewer decisions, faster to order.

Inside colors

  • Stone White
  • Bronze
  • Gunmetal
  • Ebony

Outside colors

  • Stone White
  • Pebble Gray
  • Bronze
  • Cashmere
  • Gunmetal
  • Ebony

Window types

  • Awning
  • Casement
  • Double hung
  • Single hung
  • Glider
  • Direct glaze
  • Specialty shapes

Marvin Elevate

Real wood inside, Ultrex fiberglass outside.

What it is
Real pine wood inside, with an Ultrex fiberglass exterior.
Why it matters
You get the warm, traditional look of wood in the room, without wood facing the weather outside.
Best for
Wood-trim and character homes where the inside look matters most.
Upkeep
The outside is virtually maintenance-free Ultrex. Inside, bare pine you stain yourself needs normal wood care over time.
Choosing
Curated popular styles, sizes and details for a classically rich look: more character, a few more decisions.

Inside

  • Bare pine (stainable)
  • Clear Coat
  • Painted White
  • Designer Black

Outside colors

  • Stone White
  • Pebble Gray
  • Bronze
  • Cashmere
  • Gunmetal
  • Ebony

Window types

Traditional styles in Marvin’s curated Elevate range. We’ll confirm the exact type for each opening at the measure visit.

Color swatches are approximate, because screens vary. We bring real samples to your measure visit.

Still not sure? Start with Essential in the quote. You can switch any window to Elevate before anything is ordered, and we’ll walk through both at your measure visit.

What is Ultrex fiberglass, in plain English?

Ultrex is Marvin’s own fiberglass material. It’s what Essential is made of throughout, and what protects the outside of every Elevate window. Think of it as the part that faces the weather so you don’t have to worry about it.

  • Stronger than composites, too: 3x stronger than wood/vinyl composites, so frames can be narrower and still hold up.
  • Helps with energy bills: Low thermal conductivity means it doesn’t pass heat and cold through the frame easily.
  • Finish lasts: The acrylic finish is 3x thicker than competitive finishes and is AAMA-verified to resist fading and scratches.

How it handles heat, cold and seals compared with vinyl: Why we don’t install vinyl. Source: Marvin — Ultrex fiberglass (opens in a new tab).

Questions homeowners actually ask

Tap a question to open the answer. Tap it again to close it.

Essential or Elevate: which should I pick?

Ask whether you want real wood inside. No? Pick Essential: Ultrex fiberglass inside and out, virtually maintenance-free, with narrower frames. Yes? Pick Elevate: warm pine wood inside you can stain or get factory-finished, with the same tough Ultrex outside. Elevate costs more than Essential because of that wood interior; your exact price for either line is calculated in the quote after you add your specs and contact details. You can switch lines any time before ordering.

Why don’t you install vinyl windows?

Vinyl usually costs less up front, and that’s the honest trade-off. We install only Marvin’s Ultrex fiberglass lines because of how they handle Minnesota, where a window frame goes from below zero in January to hot sun in July. According to Marvin:

  • Stronger: Ultrex is 8x stronger than vinyl, so frames stay rigid even when they’re slimmer.
  • Keeps its shape: vinyl has a hard time with extreme temperatures, which can cost it its shape and energy efficiency. Ultrex keeps its shape up to 285°F.
  • Seals stay sealed: Ultrex expands and contracts at nearly the same rate as glass, so temperature swings don’t pull at the seals.
  • Dark colors hold up: the factory finish resists fading and scratches, even in darker colors like Bronze, Gunmetal, and Ebony.

Comparing with a vinyl quote? Marvin Essential is the closest match: one material inside and out, no painting or staining, and Marvin’s most streamlined choices. Your quote shows both Marvin lines side by side.

Why don’t you show a price before I fill out the quote?

Because a generic range wouldn’t be your price: line, size, type and count change it too much. Tell us about your windows first, then add your name and email (phone is optional). Your quote is saved under a quote code you can use to pick it back up on any device, and you’ll see your personalized preliminary quote on the next screen. No sales visit is needed to see it.

Is the online quote the real price?

No, and we label it that way on purpose. The online number, calculated from your specs and details, is a preliminary range from your photos and rough measurements. The in-person measure visit, which only happens after you’ve seen the range and want to move forward, is what turns it into a final, fixed price before anything is ordered.

Do my windows come in standard sizes?

Maybe. Both Marvin Essential and Marvin Elevate are made in standard sizes and in custom sizes. Replacement openings often don’t match a standard size exactly, so those windows are made to measure. An opening that fits a standard size can cost less.

You don’t need to know which yours are. Give us a rough width and height for each window in the quote, and we’ll check every opening at your measure visit before anything is ordered.

Is sales tax included in the price?

Yes. Your preliminary range already includes the Minnesota sales tax on your windows and installation materials, so no tax line is added at the end. In Minnesota, the installer pays sales tax on the materials and builds it into the price.

More from the state: Minnesota Revenue — contractors and sales tax (opens in a new tab)

How long does installation take?

Install time is confirmed at the measure visit, once we’ve seen every opening and know the install complexity. We don’t quote a duration before that. We work one opening at a time so your house is never wide open to Minnesota weather.

How does the deposit work?

After the measure visit and final quote, a 50% materials deposit is due before we order. The balance is due when the job is complete and you’ve walked it with us. No deposit is ever collected from a preliminary quote.

My home was built before 1978. Anything special?

Possibly lead paint. We follow EPA Renovation, Repair and Painting (RRP) lead-safe practices on pre-1978 homes. Tell us the year built in Step 1 and we’ll flag it at the measure visit. The online preliminary range doesn’t add a lead-safe amount yet.

What happens to my old windows?

We haul them away and dispose of them, and it’s included in the price you see. Nothing goes in your dumpster or stays on your curb.

What if a window fogs or sticks years from now?

That’s what Marvin’s limited warranty is for. It covers manufacturing defects, belongs to whoever owns the home, and transfers if you sell. According to Marvin’s warranty (effective January 12, 2026):

Glass seal (fogging between the panes)
20 years on windows up to 60 sq ft; 10 years on larger ones
Glass stress cracks (non-tempered glass)
10 years
Hardware and other non-glass parts
10 years
Fiberglass exterior finish
10 years
Factory-applied interior wood finish (Elevate)
5 years

Marvin repairs or replaces the part, or refunds it, at its choice. The labor to remove and reinstall a window isn’t part of Marvin’s warranty; our labor warranty covers the installation itself (terms to be confirmed before launch).

Noticed a problem? Tell us within 60 days, because Marvin’s warranty asks for claims within 60 days of a defect appearing. Have your quote code handy (contact details are to be added before launch).

Marvin’s warranty doesn’t cover problems caused by installation that skips its instructions, so we install every window to Marvin’s installation instructions and local building codes. Also not covered: condensation (it comes from indoor humidity, not a defect) and normal wear.

Which cities do you serve?

We’re based in Chanhassen and serve Chanhassen, Chaska, Victoria, Excelsior, Shorewood, Eden Prairie, Minnetonka, Hopkins, Edina, St. Louis Park, Richfield, and Minneapolis. Nearby but not on the list? Start a quote anyway, and we’ll tell you honestly if you’re too far.

See your personalized price in about five minutes.

You take the photos and rough measurements, add your details, then see your price and decide whether it works for you, before anyone visits your house.

Get my preliminary quote

Already a customer? Service and warranty requests: contact details to be added before launch.